Loading Events

← Back to Events

Total Power Limited Offices

+ Google Map
6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
905-670-1535 www.totalpower.ca

Past Events

Events List Navigation

March 2016

CSA C282 for Designers and Changes for 2015

March 9, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Classes are limited to the first 15 participants to register for each seminar with a maximum of 2 attendees per firm per day. A light lunch and learning materials will be provided by Total Power. Waiting lists will be formed as required when registrations exceed the limit, and alternate date(s) may be offered at the discretion of Total Power. Total Power may choose to cancel classes if registrations are too low. All seminars will take place at 6450 Kestrel Road,…

Find out more »

GPS 110 Generator Switching

March 10, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Classes are limited to the first 12 participants to register for each seminar with a maximum of 2 attendees per firm per day. A light lunch and learning materials will be provided by Total Power. Waiting lists will be formed as required when registrations exceed the limit, and alternate date(s) may be offered at the discretion of Total Power. Total Power may choose to cancel classes if registrations are too low. All seminars will take place at 6450 Kestrel Road,…

Find out more »

GPS 100 Generator Sizing

March 16, 2016 @ 12:00 am - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Classes are limited to the first 12 participants to register for each seminar with a maximum of 2 attendees per firm per day. A light lunch and learning materials will be provided by Total Power. Waiting lists will be formed as required when registrations exceed the limit, and alternate date(s) may be offered at the discretion of Total Power. Total Power may choose to cancel classes if registrations are too low. All seminars will take place at 6450 Kestrel Road,…

Find out more »

Life Safety and the Ontario Electrical Safety Code

March 18, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Classes are limited to the first 15 participants to register for each seminar with a maximum of 2 attendees per firm per day. A light lunch and learning materials will be provided by Total Power. Waiting lists will be formed as required when registrations exceed the limit, and alternate date(s) may be offered at the discretion of Total Power. Total Power may choose to cancel classes if registrations are too low. All seminars will take place at 6450 Kestrel Road,…

Find out more »
April 2016

CSA C282 for Designers and Changes for 2015

April 15, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Content will cover the history of the Standard, the purpose of each Section in the document, and what has been changed for 2015. If you design or manage life safety or healthcare projects where an emergency power supply is required, this seminar is for you! The new edition of C282 is expected to be adopted in the next OBC edition in 2016, so familiarization with the new Standard is extremely important for designers and engineers working on new projects. Classes…

Find out more »

Life Safety and the Ontario Electrical Safety Code

April 27, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Content will cover recent changes to the OESC and CSA C282, and discuss how this affects design of emergency distribution systems with generators. If you design or manage life safety or healthcare projects where an emergency power supply is required, this seminar is for you! Familiarization with these changes to the Code is extremely important for designers and engineers working on new projects. Classes are limited to the first 15 participants to register for each seminar with a maximum of…

Find out more »

Life Safety and the Ontario Electrical Safety Code

April 28, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Content will cover recent changes to the OESC and CSA C282, and discuss how this affects design of emergency distribution systems with generators. If you design or manage life safety or healthcare projects where an emergency power supply is required, this seminar is for you! Familiarization with these changes to the Code is extremely important for designers and engineers working on new projects. Classes are limited to the first 15 participants to register for each seminar with a maximum of…

Find out more »
May 2016

GPS 130 Generator Reliability

May 25, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Explores strategies for value engineering projects through utilization of best available technologies and innovations without sacrificing overall power system reliability. Provides guidelines for selection of the system best suited to meet the project’s cost, reliability and performance criteria. Establishes measures for determination of reliability and provides tools to establish reliability criteria for overall engine-generator power system. Classes are limited to the first 15 participants to register for each seminar with a maximum of 2 attendees per firm per day. A…

Find out more »

CSA B139 Series 15 for Designers

May 27, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

ANNOUNCING AN UPDATE SEMINAR FOR DIESEL GENERATOR PROJECT DESIGN “CSA B139 Series 15 for Designers, and Changes for 2015 Edition” Offered by Total Power Limited Content will cover the history of the Standard, the purpose of each Section in the document, and all the major changes for the 2015 edition involving diesel generators. If you design or manage life safety or standby projects where a diesel generator set is required, this seminar is for you! This new edition of B139 is…

Find out more »
June 2016

CSA B139 Series 15 for Designers

June 2, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

ANNOUNCING AN UPDATE SEMINAR FOR DIESEL GENERATOR PROJECT DESIGN “CSA B139 Series 15 for Designers, and Changes for 2015 Edition” Offered by Total Power Limited Content will cover the history of the Standard, the purpose of each Section in the document, and all the major changes for the 2015 edition involving diesel generators. If you design or manage life safety or standby projects where a diesel generator set is required, this seminar is for you! This new edition of B139 is…

Find out more »

GPS 160 Generator Provisioning and Installation

June 3, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Examines engine-generator configurations and the selection of optional items such as block heaters, base tanks, enclosures, etc. Explores standard configurations versus custom options that may be required based on site-specific criteria. Introduces good design practice guidelines for the installation of engine-generator sets based on site and application specific details. Emphasizes cooling system selection, unit placement, piping requirements, etc. Classes are limited to the first 15 participants to register for each seminar with a maximum of 2 attendees per firm per…

Find out more »

GPS 100 Generator Sizing – Cancelled

June 8, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Presents methods and calculations for proper sizing of engine-generators.  Explores the alternator and engine responses to different types of loads. Presents different techniques to optimize engine-generator performance.  Load types covered: Resistive, Inductive, Capacitive, Non-linear. Deals with limitations of traditional generator sizing programs, dealing with load uncertainty in new construction, recognizing leading power factor pitfalls, and so much more! Classes are limited to the first 12 participants to register for each seminar with a maximum of 2 attendees per firm per…

Find out more »

CSA C282 for Designers and Changes for 2015 – Cancelled

June 9, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Content will cover the history of the Standard, the purpose of each Section in the document, and what has been changed for 2015. If you design or manage life safety or healthcare projects where an emergency power supply is required, this seminar is for you! The new edition of C282 is expected to be adopted in the next OBC edition in 2016, so familiarization with the new Standard is extremely important for designers and engineers working on new projects. Classes…

Find out more »
September 2016

GPS 120 Generator Paralleling Concepts and Implementation

September 9, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Introduces generator paralleling and basic concepts of paralleling engine-generators to form larger power systems. Emphasizes paralleling controls for load sharing (real and reactive power), synchronization and protection of paralleled systems. Discusses control integration, elimination of serial reliability paths and the advantages of parallel power systems over traditional single engine-generator solutions. Classes are limited to the first 15 participants to register for each seminar with a maximum of 2 attendees per firm per day. A light lunch and learning materials will…

Find out more »

GPS 170 Engines and Alternators

September 16, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Introduces engines and engine technologies used in design and implementation of standby power generation. Discusses fuel types, selection, design criteria for standby generator engine selection and testing required to prototype and validate a product. Outlines terminology and performance expectations of the engine-generator alternator. Identifies construction methods, temperature rise criteria and the fault capacities of alternators. Classes are limited to the first 15 participants to register for each seminar with a maximum of 2 attendees per firm per day. A light…

Find out more »

GPS 180 Generator Controls

September 23, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Discusses the impact of engine-generator controls and the evolution of those controls from simple analog designs to fully integrated digital platforms. Reviews integrated paralleling control technology and fully explore all paralleling functions. Classes are limited to the first 15 participants to register for each seminar with a maximum of 2 attendees per firm per day. A light lunch and learning materials will be provided by Total Power. Waiting lists will be formed as required when registrations exceed the limit, and…

Find out more »
October 2016

GPS 100 – Generator Sizing

October 4, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Presents methods and calculations for proper sizing of engine-generators.  Explores the alternator and engine responses to different types of loads. Presents different techniques to optimize engine-generator performance.  Load types covered: Resistive, Inductive, Capacitive, Non-linear. Deals with limitations of traditional generator sizing programs, dealing with load uncertainty in new construction, recognizing leading power factor pitfalls, and so much more! Classes are limited to the first 12 participants to register for each seminar with a maximum of 2 attendees per firm per…

Find out more »

GPS 190 Writing Performance-Based Specifications

October 7, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Presents techniques for effective performance-based specifications for engine-generator sets, generator accessories and transfer switches without manufacturer specific language. Provides tools for writing specifications and general guidelines applicable to typical standby power generation applications. Classes are limited to the first 15 participants to register for each seminar with a maximum of 2 attendees per firm per day. A light lunch and learning materials will be provided by Total Power. Waiting lists will be formed as required when registrations exceed the limit,…

Find out more »

GPS 160 – Generator Provisioning and Installation

October 13, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Examines engine-generator configurations and the selection of optional items such as block heaters, base tanks, enclosures, etc. Explores standard configurations versus custom options that may be required based on site-specific criteria. Introduces good design practice guidelines for the installation of engine-generator sets based on site and application specific details. Emphasizes cooling system selection, unit placement, piping requirements, etc. Classes are limited to the first 15 participants to register for each seminar with a maximum of 2 attendees per firm per…

Find out more »

CSA C282-15 for Designers and Changes for 2015

October 28, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Content will cover the history of the Standard, the purpose of each Section in the document, and what has been changed for 2015. If you design or manage life safety or healthcare projects where an emergency power supply is required, this seminar is for you! The new edition of C282 is expected to be adopted in the next OBC edition, so familiarization with the new Standard is extremely important for designers and engineers working on new projects. Classes are limited…

Find out more »
November 2016

CSA B139 Series 15 for Designers and Changes for 2015 for Ontario

November 10, 2016 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

ANNOUNCING AN UPDATE SEMINAR FOR DIESEL GENERATOR PROJECT DESIGN Offered by Total Power Limited Content will cover the history of the Standard, the purpose of each Section in the document, and all the major changes for the 2015 edition involving diesel generators. If you design or manage life safety or standby projects where a diesel generator set is required, this seminar is for you! This new edition of B139 wasto be adopted by TSSA early in 2016, and took effect in…

Find out more »
February 2017

GPS 100 – Generator Sizing

February 16, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Presents methods and calculations for proper sizing of engine-generators.  Explores the alternator and engine responses to different types of loads. Presents different techniques to optimize engine-generator performance.  Load types covered: Resistive, Inductive, Capacitive, Non-linear. Deals with limitations of traditional generator sizing programs, dealing with load uncertainty in new construction, recognizing leading power factor pitfalls, and more! Classes are limited to the first 15 participants to register for each seminar with a maximum of 2 attendees per firm per day. A…

Find out more »

GPS 110 – Generator Switching

February 23, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Discusses performance criteria used to select transfer switches to connect engine-generator power into loads. Explores different grounding considerations and techniques for different applications, plus the selection of overcurrent protection and transfer switch controls. Switch types covered: • Open transition • Soft loading • Closed transition • Paralleling switchgear • Bypass Isolation Classes are limited to the first 15 participants to register for each seminar with a maximum of 2 attendees per firm per day. A light lunch and learning materials…

Find out more »
April 2017

GPS-120 Generator Paralleling – this class has been cancelled. Check again later for a fall 2017 date.

April 13, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Introduces generator paralleling and basic concepts of paralleling engine-generators to form larger power systems. Emphasizes paralleling controls for load sharing (real and reactive power), synchronization and protection of paralleled systems. Discusses control integration, elimination of serial reliability paths and the advantages of parallel power systems over traditional single engine-generator solutions. THIS EVENT HAS BEEN CANCELLED

Find out more »

GPS-130 Generator Reliability – this class has been cancelled. Check again later for a fall 2017 date.

April 17, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Explores strategies for value engineering projects through utilization of best available technologies and innovations without sacrificing overall power system reliability. Provides guidelines for selection of the system best suited to meet the project’s cost, reliability and performance criteria. Establishes measures for determination of reliability and provides tools to establish reliability criteria for overall engine-generator power system.   THIS EVENT HAS BEEN CANCELLED

Find out more »
May 2017

GPS-160 Generator Provisioning and Installation

May 2, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Examines engine-generator configurations and the selection of optional items such as block heaters, base tanks, enclosures, etc. Explores standard configurations versus custom options that may be required based on site-specific criteria. Introduces good design practice guidelines for the installation of engine-generator sets based on site and application specific details. Emphasizes cooling system selection, unit placement, piping requirements, etc.

Find out more »

GPS-170 Engines and Alternators – this class has been cancelled. Check again later for a fall 2017 date.

May 9, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Introduces engines and engine technologies used in design and implementation of standby power generation. Discusses fuel types, selection, design criteria for standby generator engine selection and testing required to prototype and validate a product. Outlines terminology and performance expectations of the engine-generator alternator. Identifies construction methods, temperature rise criteria and the fault capacities of alternators.   THIS EVENT HAS BEEN CANCELLED  

Find out more »

GPS-180 Generator Controls

May 11, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

The purpose of this course is to provide you with a basic overview of the various control functions associated with generators. You’ll see how control panels have evolved over the years. You’ll learn the important role the control panel plays in sensing, controlling, monitoring and protecting. Intelligent communications will also be covered including, data logging, trending and predictive maintenance. Discusses the impact of engine-generator controls and the evolution of those controls from simple analog designs to fully integrated digital platforms.…

Find out more »

GPS-190 Writing Performance-Based Generator Specifications

May 18, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

The purpose of this course is to provide you with a basic overview of the elements to consider when writing specifications for engine generator sets and transfer switches. Presented in a question and answer format, you’ll learn what information is needed to put together a comprehensive specification. The seminar begins with defining the scope of the application along with code considerations. Project conditions are then covered followed by discussions of generator capacity/performance, maintenance, fuels, enclosures, sound attenuation, protection and transfer…

Find out more »

CSA B139 Series 15 for Designers, and Changes for 2015 for Ontario

May 30, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Total Power is offering this update seminar again for 2017. Content will cover the history of the Standard, the purpose of each Section in the document, and all the major changes for the 2015 edition involving diesel generators. If you design or manage life safety or standby projects where a diesel generator set is required, this seminar is for you! This new edition of B139 was adopted by TSSA in July of 2016, so familiarization with the new Code is…

Find out more »
June 2017

CSA C282-15 for Designers, and Changes for 2015

June 29, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Total Power is offering this popular update seminar again for 2017. Content will cover the history of the Standard, the purpose of each Section in the document, and what has been changed for 2015. If you design or manage life safety or healthcare projects where an emergency power supply is required, this seminar is for you! The new edition of C282 is expected to be adopted in the next OBC edition, so familiarization with the new Standard is extremely important…

Find out more »
July 2017

Life Safety and the Ontario Electrical Safety Code

July 5, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Total Power is offering this update again, on current code requirements for life safety projects specifically in Ontario. Despite changes to the code several years ago in Ontario (2012), many users are not following the changes, or are not aware of them. This can cause delays or even additional costs for engineers designing emergency power systems. These changes were harmonized with C282-15 as well, and require particular attention paid to emergency power wiring methods and protection.

Find out more »

Generator Service Training – Air Cooled

July 11, 2017 @ 8:00 am - July 13, 2017 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

LifeSafety CSA C282 Training Dates

July 20, 2017 @ 10:00 am - 1:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

The class is about 3 hours in total, here is a brief itinerary: 10:00 am start, we will have fresh hot coffee, cold soft drinks, and bottled water ready for your arrival The first hour and 30 minutes is a power point presentation which takes place in our boardroom and is taught by our technical manager, Mike August Next there is a quick tour of our facility which ends in our manufacturing area, takes about 10 min. We will have…

Find out more »
August 2017

Generator Service Training – Air Cooled Installation

August 2, 2017 @ 8:00 am - 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »
September 2017

CSA C282-15 for Designers and Changes for 2015

September 14, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Free

CSA Standard C282-15: Emergency Electrical Power Supply for Buildings. Total Power is offering this popular update seminar again for fall 2017. Content will cover the history of the Standard, the purpose of each Section in the document, and what has been changed for 2015. If you design or manage life safety or healthcare projects where an emergency power supply is required, this seminar is for you! The new edition of C282 is expected to be adopted in the next OBC…

Find out more »

Generator Service Training – Air Cooled

September 19, 2017 @ 8:00 am - September 21, 2017 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

GPS160 – Generator Provisioning and Installation

September 22, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Free

Examines engine-generator configurations and the selection of optional items such as block heaters, base tanks, enclosures, etc. Explores standard configurations versus custom options that may be required based on site-specific criteria. Introduces good design practice guidelines for the installation of engine-generator sets based on site and application specific details. Emphasizes cooling system selection, unit placement, piping requirements, etc. Each seminar was designed specifically for practicing engineers who wish to expand their understanding of current technologies, sizing, codes & standards, switching…

Find out more »

GPS190 – Writing Performance-Based Generator Specifications

September 27, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Free

The purpose of this course is to provide you with a basic overview of the elements to consider when writing specifications for engine generator sets and transfer switches. Presented in a question and answer format, you’ll learn what information is needed to put together a comprehensive specification. The seminar begins with defining the scope of the application along with code considerations. Project conditions are then covered followed by discussions of generator capacity/performance, maintenance, fuels, enclosures, sound attenuation, protection and transfer…

Find out more »
October 2017

Generator Service Training – Air Cooled

October 3, 2017 @ 8:00 am - October 5, 2017 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

Generator Service Training – Air Cooled Installation

October 12, 2017 @ 8:00 am - 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

Generator Service Training – Protector Series

October 16, 2017 @ 8:00 am - October 20, 2017 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Dealers only

Find out more »

LifeSafety CSA C282 Training Dates

October 26, 2017 @ 10:00 am - 1:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

The class is about 3 hours in total, here is a brief itinerary: 10:00 am start, we will have fresh hot coffee, cold soft drinks, and bottled water ready for your arrival The first hour and 30 minutes is a power point presentation which takes place in our boardroom and is taught by our technical manager, Mike August Next there is a quick tour of our facility which ends in our manufacturing area, takes about 10 min. We will have…

Find out more »
November 2017

B139 Series 15 for Designers and Changes for 2015 for Ontario

November 2, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Free

CSA B139 Series 15: Installation Code for Oil-burning Equipment and TSSA Fuel Code Adoption Document FS-219-16 Total Power is offering this update seminar again for 2017. Content will cover the history of the Standard, the purpose of each Section in the document, and all the major changes for the 2015 edition involving diesel generators. If you design or manage life safety or standby projects where a diesel generator set is required, this seminar is for you! This new edition of…

Find out more »

Generator Service Training – Air Cooled

November 7, 2017 @ 8:00 am - November 9, 2017 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

GPS100 – Generator Sizing

November 10, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Free

Presents methods and calculations for proper sizing of engine-generators. Explores the alternator and engine responses to different types of loads. Presents different techniques to optimize engine-generator performance. Load types covered: Limitations of traditional generator sizing programs Dealing with load uncertainty in new construction Recognizing leading power factor pitfalls When (and why) to use an upsized alternator And so much more!! Each seminar was designed specifically for practicing engineers who wish to expand their understanding of current technologies, sizing, codes &…

Find out more »

Life Safety and the Ontario Electrical Safety Code

November 14, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Free

Total Power is offering this update again, on current code requirements for life safety projects specifically in Ontario. Despite changes to the code several years ago in Ontario (2012), many users are not following the changes, or are not even aware of them. This can cause delays or even additional costs for engineers designing emergency power systems. These changes were harmonized with C282-15 as well, and require particular attention paid to emergency power wiring methods and protection. Familiarity with the CSA…

Find out more »

LifeSafety CSA C282 Training Dates

November 22, 2017 @ 10:00 am - 1:00 pm

The class is about 3 hours in total, here is a brief itinerary: 10:00 am start, we will have fresh hot coffee, cold soft drinks, and bottled water ready for your arrival The first hour and 30 minutes is a power point presentation which takes place in our boardroom and is taught by our technical manager, Mike August Next there is a quick tour of our facility which ends in our manufacturing area, takes about 10 min. We will have…

Find out more »

LifeSafety CSA C282 Training Dates

November 22, 2017 @ 10:00 am - 1:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

The class is about 3 hours in total, here is a brief itinerary: 10:00 am start, we will have fresh hot coffee, cold soft drinks, and bottled water ready for your arrival The first hour and 30 minutes is a power point presentation which takes place in our boardroom and is taught by our technical manager, Mike August Next there is a quick tour of our facility which ends in our manufacturing area, takes about 10 min. We will have…

Find out more »

GPS110 – Generator Switching

November 23, 2017 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Free

Discusses performance criteria used to select transfer switches to connect engine-generator power into loads. Explores different grounding considerations and techniques for different applications, plus the selection of overcurrent protection and transfer switch controls. Switch types covered: Open transition Soft loading Closed transition Paralleling switchgear Bypass Isolation Each seminar was designed specifically for practicing engineers who wish to expand their understanding of current technologies, sizing, codes & standards, switching technologies and reliable design characteristics surrounding emergency power systems. If you are…

Find out more »

Generator Service Training – Air Cooled

November 28, 2017 @ 8:00 am - November 30, 2017 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »
December 2017

Generator Service Training – Air Cooled

December 5, 2017 @ 8:00 am - December 7, 2017 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

Generator Service Training – Protector Series

December 11, 2017 @ 8:00 am - December 15, 2017 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Dealers only

Find out more »
January 2018

Generator Service Training – Air Cooled

January 16, 2018 @ 8:00 am - January 18, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

LifeSafety CSA C282 Training Dates

January 25, 2018 @ 10:00 am - 1:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

The class is about 3 hours in total, here is a brief itinerary: 10:00 am start, we will have fresh hot coffee, cold soft drinks, and bottled water ready for your arrival The first hour and 30 minutes is a power point presentation which takes place in our boardroom and is taught by our technical manager, Mike August Next there is a quick tour of our facility which ends in our manufacturing area, takes about 10 min. We will have…

Find out more »
February 2018

Generator Service Traning – Air Cooled

February 20, 2018 @ 8:00 am - February 22, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

LifeSafety CSA C282 Training Dates

February 28, 2018 @ 10:00 am - 1:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

The class is about 3 hours in total, here is a brief itinerary: 10:00 am start, we will have fresh hot coffee, cold soft drinks, and bottled water ready for your arrival The first hour and 30 minutes is a power point presentation which takes place in our boardroom and is taught by our technical manager, Mike August Next there is a quick tour of our facility which ends in our manufacturing area, takes about 10 min. We will have…

Find out more »
March 2018

Generator Service Training – Protecor Series

March 5, 2018 @ 8:00 am - March 9, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

Generator Service Training – Air Cooled

March 20, 2018 @ 8:00 am - March 22, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

LifeSafety CSA C282 Training Dates

March 29, 2018 @ 10:00 am - 1:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

The class is about 3 hours in total, here is a brief itinerary: 10:00 am start, we will have fresh hot coffee, cold soft drinks, and bottled water ready for your arrival The first hour and 30 minutes is a power point presentation which takes place in our boardroom and is taught by our technical manager, Mike August Next there is a quick tour of our facility which ends in our manufacturing area, takes about 10 min. We will have…

Find out more »
April 2018

Generator Service Training – Air Cooled

April 10, 2018 @ 8:00 am - April 12, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

GPS-100 – Generator Sizing

April 24, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Free

Presents methods and calculations for proper sizing of engine-generators. Explores the alternator and engine responses to different types of loads. Presents different techniques to optimize engine-generator performance. Load types covered: Limitations of traditional generator sizing programs Dealing with load uncertainty in new construction Recognizing leading power factor pitfalls When (and why) to use an upsized alternator And so much more!! Each seminar was designed specifically for practicing engineers who wish to expand their understanding of current technologies, sizing, codes &…

Find out more »

LifeSafety CSA C282 Training Dates

April 26, 2018 @ 10:00 am - 1:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

The class is about 3 hours in total, here is a brief itinerary: 10:00 am start, we will have fresh hot coffee, cold soft drinks, and bottled water ready for your arrival The first hour and 30 minutes is a power point presentation which takes place in our boardroom and is taught by our technical manager, Mike August Next there is a quick tour of our facility which ends in our manufacturing area, takes about 10 min. We will have…

Find out more »

CSA C282-15 for Designers and Changes for 2015

April 27, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Free

CSA Standard C282-15: Emergency Electrical Power Supply for Buildings. Total Power is offering this popular update seminar again for spring 2018. Content will cover the history of the Standard, the purpose of each Section in the document, and what has been changed for 2015. If you design or manage life safety or healthcare projects where an emergency power supply is required, this seminar is for you! The new edition of C282 is expected to be adopted in the next OBC…

Find out more »
May 2018

GPS-120 Generator Paralleling. This class has been cancelled. Registrants have been notified. Please check the fall schedule for new date(s).

May 1, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Introduces generator paralleling and basic concepts of paralleling engine-generators to form larger power systems. Emphasizes paralleling controls for load sharing (real and reactive power), synchronization and protection of paralleled systems. Discusses control integration, elimination of serial reliability paths and the advantages of parallel power systems over traditional single engine-generator solutions. Each seminar was designed specifically for practicing engineers who wish to expand their understanding of current technologies, sizing, codes & standards, switching technologies and reliable design characteristics surrounding emergency power…

Find out more »

Life Safety and the Ontario Electrical Safety Code

May 2, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Free

Total Power is offering this update again, on current code requirements for life safety projects specifically in Ontario. Despite changes to the code several years ago in Ontario (2012), many users are not following the changes, or are not even aware of them. This can cause delays or even additional costs for engineers designing emergency power systems. These changes were harmonized with C282-15 as well, and require particular attention paid to emergency power wiring methods and protection. Familiarity with the CSA…

Find out more »

GPS-110 – Generator Switching

May 8, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Free

Discusses performance criteria used to select transfer switches to connect engine-generator power into loads. Explores different grounding considerations and techniques for different applications, plus the selection of overcurrent protection and transfer switch controls. Switch types covered: Open transition Soft loading Closed transition Paralleling switchgear Bypass Isolation Each seminar was designed specifically for practicing engineers who wish to expand their understanding of current technologies, sizing, codes & standards, switching technologies and reliable design characteristics surrounding emergency power systems. If you are…

Find out more »

B139 Series 15 for Designers and Changes for 2015 for Ontario

May 10, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Free

CSA B139 Series 15: Installation Code for Oil-burning Equipment and TSSA Fuel Code Adoption Document FS-219-16 Total Power is offering this update seminar again for 2018. Content will cover the history of the Standard, the purpose of each Section in the document, and all the major changes for the 2015 edition involving diesel generators. If you design or manage life safety or standby projects where a diesel generator set is required, this seminar is for you! This new edition of…

Find out more »

Generator Service Training – Air Cooled

May 15, 2018 @ 8:00 am - May 17, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

GPS-160 Generator Provisioning and Installation

May 23, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Examines engine-generator configurations and the selection of optional items such as block heaters, base tanks, enclosures, etc. Explores standard configurations versus custom options that may be required based on site-specific criteria. Introduces good design practice guidelines for the installation of engine-generator sets based on site and application specific details. Emphasizes cooling system selection, unit placement, piping requirements, etc. Each seminar was designed specifically for practicing engineers who wish to expand their understanding of current technologies, sizing, codes & standards, switching…

Find out more »

GPS-200 Genset Fuels (Gas vs. Diesel) NEW for 2018!

May 25, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

The purpose of this course is to provide you with a basic overview of the elements to consider when selecting the fuel type for a standby or emergency generator. The seminar begins with a discussion of the historic & present market division between diesel and gas generators. Further discussion delves into the reliability of both types of fuel, with a detailed analysis of the pros and cons for each. A review of gas engine technology shows the differences between gas…

Find out more »

LifeSafety CSA C282 Training Dates

May 29, 2018 @ 10:00 am - 1:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

The class is about 3 hours in total, here is a brief itinerary: 10:00 am start, we will have fresh hot coffee, cold soft drinks, and bottled water ready for your arrival The first hour and 30 minutes is a power point presentation which takes place in our boardroom and is taught by our technical manager, Mike August Next there is a quick tour of our facility which ends in our manufacturing area, takes about 10 min. We will have…

Find out more »

GPS-130 Generator Reliability

May 30, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Explores strategies for value engineering projects through utilization of best available technologies and innovations without sacrificing overall power system reliability. Provides guidelines for selection of the system best suited to meet the project’s cost, reliability and performance criteria. Establishes measures for determination of reliability and provides tools to establish reliability criteria for overall engine-generator power system. Each seminar was designed specifically for practicing engineers who wish to expand their understanding of current technologies, sizing, codes & standards, switching technologies and…

Find out more »

GPS-190 Writing Performance-Based Generator Specifications

May 31, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

The purpose of this course is to provide you with a basic overview of the elements to consider when writing specifications for engine generator sets and transfer switches. Presented in a question and answer format, you’ll learn what information is needed to put together a comprehensive specification. The seminar begins with defining the scope of the application along with code considerations. Project conditions are then covered followed by discussions of generator capacity/performance, maintenance, fuels, enclosures, sound attenuation, protection and transfer…

Find out more »
June 2018

GPS-170 Engines and Alternators

June 6, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Introduces engines and engine technologies used in design and implementation of standby power generation. Discusses fuel types, selection, design criteria for standby generator engine selection and testing required to prototype and validate a product. Outlines terminology and performance expectations of the engine-generator alternator. Identifies construction methods, temperature rise criteria and the fault capacities of alternators. Each seminar was designed specifically for practicing engineers who wish to expand their understanding of current technologies, sizing, codes & standards, switching technologies and reliable…

Find out more »

GPS-180 Generator Controls

June 7, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

The purpose of this course is to provide you with a basic overview of the various control functions associated with generators. You’ll see how control panels have evolved over the years. You’ll learn the important role the control panel plays in sensing, controlling, monitoring and protecting. Intelligent communications will also be covered including, data logging, trending and predictive maintenance. Discusses the impact of engine-generator controls and the evolution of those controls from simple analog designs to fully integrated digital platforms.…

Find out more »

Generator Service Training – Protector Series

June 11, 2018 @ 8:00 am - June 15, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

GPS-100 – Generator Sizing

June 19, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Free

Presents methods and calculations for proper sizing of engine-generators. Explores the alternator and engine responses to different types of loads. Presents different techniques to optimize engine-generator performance. Load types covered: Limitations of traditional generator sizing programs Dealing with load uncertainty in new construction Recognizing leading power factor pitfalls When (and why) to use an upsized alternator And so much more!! Each seminar was designed specifically for practicing engineers who wish to expand their understanding of current technologies, sizing, codes &…

Find out more »

Generator Service Training – Air Cooled

June 26, 2018 @ 8:00 am - June 28, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »
July 2018

Generator Service Training – Protector Series

July 9, 2018 @ 8:00 am - July 13, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

Generator Service Training – Industrial Controls

July 16, 2018 @ 8:00 am - July 20, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

Generator Service Training – Air Cooled

July 25, 2018 @ 8:00 am - July 27, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »
August 2018

Generator Service Training – Air Cooled

August 7, 2018 @ 8:00 am - August 9, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

Generator Service Training – Protector Series

August 27, 2018 @ 8:00 am - August 31, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »
September 2018

GPS-200 Genset Fuels (Gas vs. Diesel) NEW for 2018!

September 5, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

The purpose of this course is to provide you with a basic overview of the elements to consider when selecting the fuel type for a standby or emergency generator. The seminar begins with a discussion of the historic & present market division between diesel and gas generators. Further discussion delves into the reliability of both types of fuel, with a detailed analysis of the pros and cons for each. A review of gas engine technology shows the differences between gas…

Find out more »

Generator Service Training – Protector Series

September 10, 2018 @ 8:00 am - September 14, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

Generator Service Training – Air Cooled

September 18, 2018 @ 8:00 am - September 20, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »
October 2018

Generator Service Training – Protector Series

October 1, 2018 @ 8:00 am - October 5, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

CSA C282-15 for Designers and Changes for 2015

October 10, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

CSA Standard C282-15: Emergency Electrical Power Supply for Buildings. Total Power is offering this popular update seminar again for spring 2018. Content will cover the history of the Standard, the purpose of each Section in the document, and what has been changed for 2015. If you design or manage life safety or healthcare projects where an emergency power supply is required, this seminar is for you! The new edition of C282 is expected to be adopted in the next OBC…

Find out more »

Life Safety and the Ontario Electrical Safety Code

October 11, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Total Power is offering this update again, on current code requirements for life safety projects specifically in Ontario. Despite changes to the code several years ago in Ontario (2012), many users are not following the changes, or are not even aware of them. This can cause delays or even additional costs for engineers designing emergency power systems. These changes were harmonized with C282-15 as well, and require particular attention paid to emergency power wiring methods and protection. Familiarity with the CSA…

Find out more »

Generator Service Training – Air Cooled

October 16, 2018 @ 8:00 am - October 18, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

B139 Series 15 for Designers and Changes for 2015 for Ontario

October 30, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

CSA B139 Series 15: Installation Code for Oil-burning Equipment and TSSA Fuel Code Adoption Document FS-219-16 Total Power is offering this update seminar again for 2018. Content will cover the history of the Standard, the purpose of each Section in the document, and all the major changes for the 2015 edition involving diesel generators. If you design or manage life safety or standby projects where a diesel generator set is required, this seminar is for you! This new edition of…

Find out more »
November 2018

GPS-160 Generator Provisioning and Installation

November 1, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Examines engine-generator configurations and the selection of optional items such as block heaters, base tanks, enclosures, etc. Explores standard configurations versus custom options that may be required based on site-specific criteria. Introduces good design practice guidelines for the installation of engine-generator sets based on site and application specific details. Emphasizes cooling system selection, unit placement, piping requirements, etc. Each seminar was designed specifically for practicing engineers who wish to expand their understanding of current technologies, sizing, codes & standards, switching…

Find out more »

Generator Service Training – Air Cooled

November 6, 2018 @ 8:00 am - November 8, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »

GPS-100 – Generator Sizing

November 13, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Presents methods and calculations for proper sizing of engine-generators. Explores the alternator and engine responses to different types of loads. Presents different techniques to optimize engine-generator performance. Load types covered: Limitations of traditional generator sizing programs Dealing with load uncertainty in new construction Recognizing leading power factor pitfalls When (and why) to use an upsized alternator And so much more!! Each seminar was designed specifically for practicing engineers who wish to expand their understanding of current technologies, sizing, codes &…

Find out more »

GPS-110 – Generator Switching

November 15, 2018 @ 12:00 pm - 2:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map

Discusses performance criteria used to select transfer switches to connect engine-generator power into loads. Explores different grounding considerations and techniques for different applications, plus the selection of overcurrent protection and transfer switch controls. Switch types covered: Open transition Soft loading Closed transition Paralleling switchgear Bypass Isolation Each seminar was designed specifically for practicing engineers who wish to expand their understanding of current technologies, sizing, codes & standards, switching technologies and reliable design characteristics surrounding emergency power systems. If you are…

Find out more »

Generator Service Training – Air Cooled

November 20, 2018 @ 8:00 am - November 22, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »
December 2018

Generator Service Training – Protector Series

December 3, 2018 @ 8:00 am - December 7, 2018 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »
January 2019

Generator Service Training – Air Cooled

January 15, 2019 @ 8:00 am - January 17, 2019 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »
February 2019

Generator Service Training – Air Cooled

February 5, 2019 @ 8:00 am - February 7, 2019 @ 5:00 pm
Total Power Limited Offices, 6450 Kestrel Rd.
Mississauga, Ontario L5T 1Z7 Canada
+ Google Map
Find out more »
+ Export Events

Training Registration